|
| |
| Temp-O-Matic High Boy Dimensions
and Specifications
|
Description
• Three firing
rates available-85,000, 105,000 and 120,000 BTU/HR input.
• Available with belt drive or direct drive blowers
• The Temp-O-Matic furnace is a quality furnace, competitively priced.
The advanced styling and engineering provide an appliance type
compactness. Construction
• CABINET
CONSTRUCTION-Heavy gauge steel, Seal-Tite design,
completely assembled at factory.
• FINISH-Electrostatic
powder coat for greater durability.
• BURNER-Constant
ignition, pressure atomizing type. Shipped assembled
in furnace.
• CONTROLS-Constant
ignition primary control, combination blower and adjustable limit control.
• WIRING-All wiring
factory connected.
• HEAT
EXCHANGER-Heavy gauge hot rolled alloy-steel. Visually hand-welded, inside and out.
• RADIATOR-”Wrap-around”
type with interior baffling for maximum heat transfer.
• BLOWER-Squirrel
cage type. Permanently lubricated, resilient mounted.
• BLOWER
MOTOR-Designed for heavy duty, continuous operation. Thermally protected.
• BLOWER
ASSEMBLY-Entire unit with motor can be easily removed for servicing.
• FILTERS-Extra
large filtration area.
• FLUE COLLECTOR
BOX-Completely enclosed by cabinet.
• INSULATION-Spun
glass and aluminum foil for “hand cool” cabinet.
• ACCESS
DOOR-Easily removed for access to burner and controls. Completely enclosed controls
and burner. |
| Temp-O-Matic Low Boy Dimensions
and Specifications
|
Description
• Three firing
rates available-85,000, 105,000 and 120,000 BTU/HR input.
• Available with belt drive or direct drive blowers
• Available in front flue or rear flue.
• The Temp-O-Matic furnace is a quality furnace, competitively priced.
The advanced styling and engineering provide an appliance type
compactness. Construction
• CABINET
CONSTRUCTION-Heavy gauge steel, Seal-Tite design,
completely assembled at factory, leveling legs.
• FINISH-Electrostatic
powder coat for greater durability.
• BURNER-Constant
ignition, pressure atomizing type. Shipped assembled in
furnace.
• CONTROLS-Constant
ignition primary control, combination blower and limit control.
• WIRING-All wiring
factory connected.
• HEAT
EXCHANGER-Heavy gauge hot rolled alloy-steel. Visually hand-welded, inside and out.
• RADIATOR-”Wrap-around”
type with interior baffling for maximum heat transfer.
• BLOWER-Squirrel
cage type. Permanently lubricated, resilient mounted.
• BLOWER
MOTOR-Designed for heavy duty, continuous operation. Thermally protected.
• BLOWER
ASSEMBLY-Entire unit with motor can be easily removed for servicing.
• FILTERS-Extra
large filtration area.
• FLUE COLLECTOR
BOX-Completely enclosed by cabinet.
• INSULATION-Spun
glass and aluminum foil for “hand cool” cabinet.
• ACCESS
DOOR-Easily removed for access to burner and controls. Completely enclosed controls
and burner. |
| Temp-O-Matic Counterflow Dimensions
and Specifications
|
 Description
• Three firing
rates available-85,000, 105,000 and 120,000 BTU/HR input.
• Available with belt drive or direct drive blowers
• The Temp-O-Matic furnace is a quality furnace, competitively priced.
The advanced styling and engineering provide an appliance type
compactness. Construction
• CABINET
CONSTRUCTION-Heavy gauge steel, Seal-Tite design,
completely assembled at factory.
• FINISH-Electrostatic
powder coat for greater durability.
• BURNER-Constant
ignition, pressure atomizing type. Shipped
assembled
in furnace.
• CONTROLS-Constant
ignition primary control, combination blower and limit control.
• WIRING-All wiring
factory connected.
• HEAT
EXCHANGER-Heavy gauge hot rolled alloy-steel. Visually hand-welded, inside and out.
• RADIATOR-”Wrap-around”
type with interior baffling for maximum heat transfer.
• BLOWER-Squirrel
cage type. Permanently lubricated, resilient mounted.
• BLOWER
MOTOR-Designed for heavy duty, continuous operation. Thermally protected.
• BLOWER
ASSEMBLY-Entire unit with motor can be easily removed for servicing.
• FILTERS-Extra
large filtration area.
• FLUE
EXTENSION-Double wall, ventilated for safety.
• FLUE OUTLET-Top
front for easy service access in closets and utility rooms.
• FLUE COLLECTOR
BOX-Completely enclosed by cabinet.
• INSULATION-Spun
glass and aluminum foil for “hand cool” cabinet.
• ACCESS
DOOR-Easily removed for access to burner and controls. Completely enclosed controls
and burner. |
| Temp-O-Matic Horizontal / Counterflow
Dimensions and Specifications
|
Construction
• CABINET
CONSTRUCTION-Heavy gauge steel,
Seal-Tite design, completely assembled at
factory.
• FINISH-Electrostatic
powder coat for greater
durability.
• BURNER-Factory
pre-wired, pre-assembled and
tested. Constant ignition, pressure atomizing
type.
Shipped assembled in furnace. Ready to connect to fuel supply line after proper
set-up
procedure.
• CONTROLS-Constant
ignition primary control, combination blower and limit control.
• HEAT
EXCHANGER-Heavy gauge hot rolled alloy-steel.
• RADIATOR-”Wrap-around”
type with interior baffling for maximum heat transfer.
• BLOWER-Multi-Speed,
Direct Drive. Permanently lubricated, resilient mounted.
• BLOWER
ASSEMBLY-Designed for heavy duty, continuous operation. Thermally protected.
• INSULATION-Spun
glass and aluminum foil for “hand cool” cabinet.
• WIRING-All wiring
factory connected, installed and tested-ready to connect to house wiring.
Features:
• Efficiencies up to 83.5%.
• Three firing rates-85,000, 105,000 and 120,000 BTU/HR.
• Two position operation - Counterflow or Horizontal.
• Field convertible air intake/discharge for horizontal operation.
• Heavy 14 & 16 gauge heat exchanger.
• Rugged 20 gauge cabinet with powder paint finish.
• Multi-speed direct drive blower.
• Factory wired for air-conditioning.
• Made in the USA. |
| Centennial Series - High Boy Dimensions
and Specifications
|
 Construction
• CABINET
CONSTRUCTION-Heavy gauge steel, Seal-Tite design,
completely assembled at factory.
• BURNER-Constant
ignition, pressure atomizing type. Shipped
assembled
in furnace.
• CONTROLS-Constant
ignition primary control, combination blower and
limit control, transformer with air conditioning relay.
• WIRING-All wiring
factory connected.
• HEAT
EXCHANGER-Heavy gauge hot rolled alloy-steel. Visually
hand-welded, inside and out.
• RADIATOR-Type
heat exchanger with interior baffling for maximum heat
transfer.
• BLOWER-Squirrel
cage type. Permanently lubricated, resilient mounted.
• BLOWER
MOTOR-Designed for heavy duty, continuous operation. Thermally protected.
• BLOWER
ASSEMBLY-Entire unit with motor can be easily removed for servicing.
• FLUE OUTLET-Top
front for easy service access in closets and utility rooms.
• INSULATION-Spun
glass and aluminum foil for “hand cool” cabinet.
• ACCESS
DOOR-Easily removed for access to burner and controls. Completely enclosed controls
and burner. Standard Equipment
Seven sizes available-85,000 through 245,000 BTU/HR input.
• A.F.U.E. Efficiencies up to 83.5%.
• 10 and 14 gauge HRS radiant heat exchanger.
• Rugged 20 gauge cabinet with powder paint finish.
• Large, accessible heat exchanger clean-out ports.
• Limited lifetime guarantee on heat exchanger.
• Belt or direct drive blowers available.
• Honeywell controls standard.
• Air conditioning fan center standard on direct drive models.
• Integral leveling base standard on most models.
• Made in the USA. |
| Centennial Series - Low Boy Dimensions
and Specifications
|
 Construction
• CABINET
CONSTRUCTION-Heavy gauge steel, Seal-Tite design,
completely assembled at factory.
• BURNER-Constant
ignition, pressure atomizing type. Shipped
assembled
in furnace.
• CONTROLS-Constant
ignition primary control, combination blower and
limit control, transformer with air conditioning relay.
• WIRING-All wiring
factory connected.
• HEAT
EXCHANGER-Heavy gauge hot rolled alloy-steel. Visually
hand-welded, inside and out.
• RADIATOR-Type
heat exchanger with interior baffling for maximum heat
transfer.
• BLOWER-Squirrel
cage type. Permanently lubricated, resilient mounted.
• BLOWER
MOTOR-Designed for heavy duty, continuous operation. Thermally protected.
• BLOWER
ASSEMBLY-Entire unit with motor can be easily removed for servicing.
• FILTERS-Extra
large filtration area.
• FLUE
OUTLET-Available in front or rear flue to fit your application.
• INSULATION-Spun
glass and aluminum foil for “hand cool” cabinet.
• ACCESS
DOOR-Easily removed for access to burner and controls. Completely enclosed controls
and burner. Standard Equipment
Seven sizes available-85,000 through 245,000 BTU/HR input.
• A.F.U.E. Efficiencies up to 83.5%.
• 10 and 14 gauge HRS radiant heat exchanger.
• Rugged 20 gauge cabinet with powder paint finish.
• Large, accessible heat exchanger clean-out ports.
• Limited lifetime guarantee on heat exchanger.
• Belt or direct drive blowers available.
• Front or rear flue as a no cost option.
• Honeywell controls standard.
• Air conditioning fan center standard on direct drive models.
• Integral leveling base standard on most models.
• Made in the USA. |
| Centennial Series - Counterflow Dimensions
and Specifications
|
 Construction
• CABINET
CONSTRUCTION-Heavy gauge steel, Seal-Tite design,
completely assembled at factory.
• BURNER-Constant
ignition, pressure atomizing type.
• CONTROLS-Constant
ignition primary control, combination blower and
limit control, upper fan/limit control.
• HEAT
EXCHANGER-Heavy gauge hot rolled alloy-steel.
• RADIATOR-Type
heat exchanger with interior baffling for maximum heat
transfer.
• BLOWER-Squirrel
cage type. Permanently lubricated, resilient mounted.
• BLOWER
MOTOR-Designed for heavy duty, continuous operation.
Thermally protected.
• BLOWER
ASSEMBLY-Entire unit with motor can be easily removed for
servicing.
• FILTERS-Extra
large filtration area.
• FLUE
OUTLET-Middle front for easy service access in closets and utility rooms. Standard Equipment
Six Sizes Available-105,000
through 245,000 BTU/HR input.
• A.F.U.E. Efficiencies to 86%
• 10 and 14 gauge HRS radiant heat exchanger
• Rugged 20 gauge cabinet with powder paint finish
• Large, accessible heat exchanger clean-out ports
• Limited lifetime guarantee on heat exchanger
• Belt or direct drive blower option (105,00 - 175,000 DD only)
• Honeywell controls standard
• Air conditioning fan center standard on direct drive models
• Combustible floor bases available.
• Made in the USA. |
|
|
|
